Using a Noise Gate in Audacity: The Final Touch for Clean AI Music

Did We Miss Any Basic Steps?

Throughout the series, we've covered normalization, click removal, noise reduction, and equalization. These steps form a strong foundation for cleaning up and enhancing your audio. However, the use of a noise gate is another technique often employed to reduce unwanted background noise, particularly in quiet sections of your track.

What Is a Noise Gate?

A noise gate is an audio processor that automatically reduces the volume of any sound below a certain threshold. It’s typically used to remove low-level noise that remains after noise reduction, such as hums, buzzes, or faint background sounds. The gate "closes" when the audio falls below the threshold, effectively silencing the background noise during quiet sections of the track.

When to Use a Noise Gate:

  • After Noise Reduction: If you still hear low-level noise that wasn’t fully removed by noise reduction, a noise gate can help clean it up.
  • During Pauses: If your track has periods of silence or quiet moments, a noise gate ensures that these sections remain truly silent, removing any lingering noise.
  • Vocal Tracks: It’s particularly useful in vocal tracks to cut out background noise when the singer or speaker isn’t actively producing sound.

Potential Downsides:

  • Cutting Off Desirable Audio: If not set correctly, a noise gate can cut off parts of the audio that you actually want to keep, particularly softer sounds or the tail end of notes.
  • Unnatural Sound: Overuse of a noise gate can make the track sound unnatural, as it might abruptly cut off audio that should fade naturally.

How to Apply a Noise Gate in Audacity:

  1. Select the Track or Portion: Highlight the section where you want to apply the noise gate.
  2. Open the Noise Gate Tool: Go to Effect > Noise Gate.
  3. Set the Threshold:
    • Start with a threshold that matches the level of the noise you want to remove.
    • Common starting point: -30 dB to -40 dB, depending on your track’s overall volume.
  4. Adjust Attack/Release Times:
    • Attack: Determines how quickly the gate opens when sound exceeds the threshold. Start with 5 ms.
    • Release: Controls how quickly the gate closes after the sound falls below the threshold. Start with 100 ms to avoid abrupt cuts.
  5. Preview and Apply: Use the Preview button to hear how the noise gate affects your track, then click OK to apply it.

Conclusion

Adding a noise gate as the final step can be very effective for cleaning up any remaining background noise, especially in quiet sections of your track. However, it’s important to use it carefully to avoid cutting off desirable audio.

What’s Next?

This concludes our series on using Audacity to refine AI-generated music tracks. You now have a comprehensive toolkit for taking raw AI music and transforming it into a polished, professional sound.

If you're considering using BandLab for its presets and ease of use, you can apply what you've learned here to fine-tune your tracks after using BandLab’s automated tools, or dive deeper with Audacity for more control.

Back to blog

Leave a comment